Technical specifications
• Operating mode: Semi-automatic
• Waveform: e-cube biphastic (truncated exponential type); impedance compensated.
• Energy: 200J fixed
• Adult:
– nominal 150 J into a 50 ohm load.
– Infant/child: nominal 50 joules into a 50 ohm load.
• Shock energy accuracy: within ± 3% (200J into 50 ohm
• Shock to shock cycle time: Typically less than 20 seconds.
• Protocol: Voice prompts and indicators guide through protocol.
• Charge control: Automatic by Software (Arrhytmia Detection System and Charging control).
• Charge time from “Shock advised”: <10 seconds, typical
• Voice instruction: Voice messages guide through use of defibrillator
• Controls: Shock Button, i-Button, On/Off Button.
• Indicators: 7 LEDs (different colors), i-Button.
• Patient isolation: Type BF.
• Battery: 12 Volt DC, 4.2 Ah, lithium manganese dioxide, disposable long-life primary cell
• Battery capacity: Min. 200 Shocks or 10 hours of operating time.
• Data recording and transmission: Data stored: First 40 minutes of ECG and the entire incident’s events and analysis decision.
• Size: 220 x 260 x 70 mm
• Weight: 2.2 Kg (4.48 lbs) with battery pack